Part number
SPVQF10201
Water-proof Type (Surface Mount) SPVQF Series
Automotive
Water-proof Type
Dust-proof Type
MEMBERS ONLY
Basic information
- Changeover timing
- Non shorting
- Operation part shape
- Push
- Terminal type
- For PC board(Reflow)
- Operating force
- 1.8N max.
- Dimensions (W×D×H)
- 6.3×8.5×7.0 mm
Specifications
- Operating temperature range
- -40℃ to +90℃
- Rating(max.)/(min.)(Resistive load)
- 50mA 18V DC/50μA 5V DC
- Electrical performance
- Contact resistance(Initial/After operating life)
- 75mΩ max./2Ω max.
- Insulation resistance
- 100MΩ min. 250V DC
- Voltage proof
- 250V AC for 1 minute
- Mechanical performance
- Terminal strength
- 5±1N for 10±1S
- Actuator strength
- 20N
- Durability
- Operating life without load
- 300,000 cycles 2Ω max.
- Operating life with load Rating(max.)(Resistive load)
- 300,000 cycles 2Ω max.
- Environmental performance
- Cold
- -40℃ 500h
- Dry heat
- 90℃ 500h
- Damp heat
- 60℃, 90 to 95%RH 500h
- Minimum order unit(pcs.)
- Japan
- 400
- Export
- 1,600
Land Dimensions
Circuit Diagram
Packing Specifications
Taping
- Number of packages (pcs.)
-
- 1 reel
- 400
- 1 case / Japan
- 800
- 1 case / export packing
- 1,600
- Tape width (mm)
- 25.4
- Export package measurements (mm)
- 428 x 413 x 172
Soldering Conditions
Example of Reflow Soldering Condition
- Heating method
Double heating method with infrared heater. - Temperature measurement
Thermocouple 0.1 to 0.2VCA（K）or CC（T）at soldering portion （copper foil surface）. A heat resisting tape should be used for fixed measurement. - Temperature profile
| A(℃) 3s max. |
B(℃) | C(s) | D(℃) | E(℃) | F(s) |
|---|---|---|---|---|---|
| 250 | 230 | 40 | 180 | 150 | 120 |
(1) The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board’s temperature greatly differs from that of the switch, surface depending on the PC board’s material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures.
(2) Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended.
Reference for Hand Soldering
- Soldering temperature
- 350±5℃
- Soldering time
- 3s max.
Notes are common to this series/models
- This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
- This unit cannnot be used in water (IP6K7 rating, except for terminal).
- Please place purchase orders for taping products per minimum order unit (1 reel or a case).
- This products can be used in vehicles.
Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.