Travel 2mm
Actuator directions Horizontal
Actuator length 4mm
Poles 1
Positions 2
Operating force 3±1.5N
Mounting method Snap-in (t1.6)
Changeover timing Non shorting
Soldering Manual, Dip
Operating temperature range -40℃ to +85℃
Rating (max.)/(min.) (Resistive load) 0.1A 12V DC/1mA 5V DC
Electrical performance Contact resistance
(Initial performance/After lifetime)
30mΩ max./80mΩ max.
Insulation resistance 100MΩ min. 500V DC
Voltage proof 500V AC for 1 minute
Mechanical performance Terminal strength 3N for 1 minute
Actuator strength Operating direction 30N
Pulling direction 10N
Durability Operating life without load 10,000 cycles 60mΩ max.
Operating life with load
(at max. rated load)
10,000 cycles 80mΩ max.
Environmental performance Cold -40℃ 500h
Dry heat 85℃ 500h
Damp heat 60℃, 90 to 95%RH 500h
Minimum order unit (pcs.) Japan 1,000
Export 5,000


Slide Switch

Mounting Hole Dimensions

Slide Switch
Viewed from direction A in the dimensions.

Shape of Frame Leg

Slide Switch

Circuit Diagram

Slide Switch

Packing Specifications

Number of packages (pcs.) 1 case / Japan 1,000
1 case / export packing 5,000
Export package measurements (mm) 400×270×290

Soldering Conditions

Reference for Dip Soldering
ItemsPreheating temperature120℃ max.
Preheating time60s max.
Dip solderingSoldering temperature260±5℃
Duration of immersion5+0/-1s (2 times)

Reference for Hand Soldering
Soldering temperature350±10℃
Soldering time3s max.

Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).
  3. Products other than those listed in the above chart are also available. Please contact us for details.
  4. Please contact us for automotive use products.