Travel 2mm
Actuator directions Horizontal
Poles 1
Positions 2
Operating force 1±0.5N
Changeover timing Not specified
Soldering Reflow
Operation Right-side recoil
Shape of frame leg Flat
Location lug Without
Operating temperature range -10℃ to +60℃
Rating (max.)/(min.) (Resistive load) 10mA 5V DC/50µA 3V DC
Electrical performance Contact resistance
(Initial performance/After lifetime)
10Ω max./10Ω max.
Insulation resistance 100MΩ min. 100V DC
Voltage proof 100V AC for 1 minute
Mechanical performance Terminal strength 3N for 1 minute
Actuator strength Operating direction 10N
Pulling direction 10N
Durability Operating life without load 100,000 cycles 10Ω max.
Operating life with load
(at max. rated load)
100,000 cycles 10Ω max.
Environmental performance Cold -40℃ 96h
Dry heat 85℃ 96h
Damp heat 40℃, 90 to 95%RH 96h
Minimum order unit (pcs.) Japan 6,000
Export 24,000


Slide Switch

Land Dimensions

Slide Switch

Circuit Diagram

Slide Switch

Packing Specifications


Number of packages (pcs.) 1 reel 6,000
1 case / Japan 12,000
1 case / export packing 24,000
Tape width (mm) 24
Export package measurements (mm) 428×413×172

Soldering Conditions

Example of Reflow Soldering Condition
1. Heating method
Double heating method with infrared heater.
2. Temperature measurement
Thermocouple 0.1 to 0.2 Φ CA (K) or CC (T) at soldering portion (copper foil surface). A heat resisting tape should be used for fixed measurement.
3. Temperature profile
3s max.

(1) The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures.
(2) Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended.

Reference for Hand Soldering
Soldering temperature350±5℃
Soldering time3s max.

Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).